For: Chevy, Dodge, Ford,
Part Number: Dana-60CSK-001
Category: steering
(((NOTE: Steering kits are built to order and take up to 5 days to build. Due to confusion, this does not include weekends and other lead times noted on the web site. These high quality USA made kits are in high demand.)))
Dana 60 Crossover Steering Kit. All Solid Axle king pin Dana 60 Ford, Dodge, and Chevy Trucks and Conversions.
Full High Steer includes driver side steering arm, studs, and tie rod.
You will also lose the ability to run the factory style sway bar, we recommend the Currie Anti Rock.
Steering Links are trimmable, we generally give at least an inch on each side extra to be safe.
On Chevy/Gmc trucks we form the drag links to clear the cross member under the engine, the formed end will be closest to the pit man arm.
Full High Steer - $675 is also offered as a separate kit.
(Full High Steer includes pitman arm, Draglink AND Tie rod with ends, passenger side AND drivers side steering arms and steering arm install kits)
Specify Chevy, Ford, or Dodge, amount of lift, and crossover or full high steer.
67-87 Chevy/GMC vehicles will need to switch steering box's to a 2wd box in order to install crossover steering. You will also loose the ability to run the factory style sway bar.Links are trim-able, we generally give at least an inch on ea side extra to be safe. Sky Manufacturing now offers a Chevy/Gmc steering box brace kit as an add on to the crossover steering kit.
88-2010 Note:GMC/Chevy steering box's use a 3 relief pit man arm, these will need to be swapped to a 4 relief sector shaft or swap the entire box.
Sky Manufacturing can also custom build a kit to fit almost any axle and vehicle combo, example is a Jeep YJ Wrangler with a Chevy Dana 60. By machining the Jeep pit man arm, to accept a GM tie rod end, we can make a custom drag link length, and bingo you have a Dana 60 Jeep YJ Crossover kit.
If you have a ball joint style Ford Dana 60, 92-04 axle, check out in our Ford section by clicking HERE. There you will find Sky Manufacturing's new Ball Joint Dana 60 Ford Over the Spring Steering Conversion. We machine your knuckle for a keyed 5 stud steering arm. This 5 stud keyed system is the strongest bolt on system we have encountered. We use our Chrome moly 9/16ths Dana 44 studs and conical washers. Kit will correct for a 7 inch lift with stock pit man arm.
