Sky Manufacturing is now building 99-04 Ford f-350, F-250, and Excursion 4x4 leveling kits. Kits are of a perch drop hanger design, which maintains a factory ride, over the harsh add-a-leafs commonly used by many shops for their very low cost and high profit margins.

Sky's hanger/ leveling kits are designed to give 2 inch's of front vehicle lift without changing spring rate. 2 inch lift does not require the use of new pitman arms, brake lines or shocks. We do however recommend new shocks to add to the ride comfort and new stance. Kit installs in less than 2 hours with basic hand tools, though an auto hoist will greatly reduce the install time. Kit reuses factory hardware. No driveline modifications are needed. Sway bar is perfectly fine with no extension. Tire size on the F-250/F-350 is a 35 inch or 315 metric, while the Excursion is a 33 inch or 285 metric due to its slightly lower factory stance.

Kit is constructed from 3/8ths and 1/4 inch laser cut cnc formed steel, mig welded, and gloss black powdercoated. Fully USA made and assembled!

Note: Factory crash bar is not reused with hanger kits.
Installation: Front hangers will directly replace factory hangers, removal of bumper is recomended. Support vehicle correctly, remove springs from hangers and shackle. Remove factory hardware and front leaf spring hangers. Install new hangers reusing factory hardware. Rear shackles, simply remove the shackles, reusing factory hardware as possible. install new longer shackles, reinstall leaf springs to factory specs, check all hardware, retorque after 500 miles.